Home Contact    Site Map

Wireless supervised controller applications:  Pumps, level control, monitoring, lighting

Performance    2 Miles ( 3 km )   Optional extended range up to 10 Miles (16Km)

Select the  Master and One Node only, then select the Antenna  ( Two required )  Please contact us for assistance or pricing


943363 Command Center

 Wiring Diagram

OPERATION:  943364
Command operation, Manual or Automatic

Manual: Pump manually controlled by the operator 943364

Automatic: The tank level sensor provides the low
 or high status to start or stop the operation.

Blue light indicates the pump status
Red light indicates the tank level is low
Green light indicates the tank level is high


433MHz Antenna Selection  

Control and Remote Monitor  Base System  

943364B   Transceiver Two Way To operate manual or automatic, Status indicators, Level, Pump operation.
Optional Yellow light indicates low battery (solar)
        Please request latest price    


Operating Voltage: 12 VDC 
Operating Temperature: -4 to +140 F (-20 to +60 C)
Number of Codes: 4096 codes, DIP switch programming
Carrier Frequency 433 MHz, 16 BIT Digital
Current Transmitter Standby 70mA, transmitting  400mA
Current  Receiver Standby 70mA, operation, 400 mA
Data Input TX  Dry contact   N/O:  normally open
Relay Output 6 Amp, 250VAC SPDT, NO/NC pilot duty class 2
Antenna Impedance 50 Ohms, Antenna optional Yagi or Omni
RF Power per FCC Part 15.249,  50mV/m @ 3m
Dimension (*) 14.00 x 10.00 x 6. in. (360 x 250 x 160 mm)
Enclosure rating NEMA 4,  IP65   waterproof
Compliance FCC CFR part 15.247 ISM
   (*) Final product dimensions may vary

 DISCLAIMER:    Contact a licensed professional for your project.   Warning: Radio control equipment is not to be used in life safety

     Copyright   Electrodepot. All rights reserved